Corro-Fix 911
Features and Highlights:
Uses:
CORRO-FIX 911 is a highly modified “5-minute” type repair compound reinforced with *Kevlar™ micro fibers and formulated for strength and versatility under adverse field conditions. CORRO-FIX 911 is so tolerant of wet conditions that it may even be used underwater or to repair wet, leaking pipes.
Its also widely used as a Interface and load transfer agent In the repair of Pipelines and structures with Composites CORRO-FIX 911 is solvent-free, odor free, no toxins and contains no carcinogens. As a General Use System CORRO-FIX 911 adheres strongly to metal, wood, concrete, fiberglass, vinyl, steel, copper, PVC, gel coat, galvanizing and most other engineering materials.
Transportation:
Non-regulated by United States - Departmenrt of Transport (USDOT),
International Air Transport Association (IATA) or
International Maritime Organization (IMO)
VEHICLE TYPE
PIGMENTATION
THINNER
CLEANER
MIXING RATIO
INDUCTION TIME
POT LIFE
SOLIDS BY VOLUME
REC. DRY THICKNESS
DRY TIME (TOUCH)
DRY TIME (HARD)
APPLICATION METHOD
SHELF LIFE
VOC
Epoxy / Mercaptan (sulphur odor)
Color/Inert/Fibrous reinforcement
Not required
Lacquer thinner
1 : 1 by volume
Not required
Approx. 4 minutes/80°F(27°C), 3 minutes/95°F(35°C)
100%
Not applicable
Approx. 5 minutes/80°F(27°C), 4 minutes/95°F(35°C)
Approx. 10 minutes/80°F(27°C), 8 minutes/95°F(35°C)
Straight edged tool, spatula.
12 Months minimum
Zero
Products Guideline
Online Moisture Tolerant Maintenance System
Corro-Dur 255
Solvent-Free
Enhanced Underwater Adhesion
High Abrasion Resistance
Works Best on Rough Surface
Novalac Formulation
High Chemical Resistant
Corro-Dur 257
Solvent-Free
Applies Above or Below Water
Fiber Reinforced
Flexibilized
Excellent Chemical and Physical Resistance
Corro-Dur 258
Solvent-Free
Applies Above or Below Water
High Abrasion Resistance
Excellent Chemical and Physical Resistance
Corro-Dur 563
Solvent-Free
Applies Above or Below Water
High Abrasion Resistance
Easy 1:1 Mixing Ratio
Excellent Chemical and Physical Resistance
Corro-Fix 911
Solvent-Free
Applies Above or Below Water
Cure in 5 minutes
Easy 1:1 Mixing Ratio
Adheres to a variety of materials
Gas-Pruf 130
High Performance
100% Solids Epoxy Coating
Hydrocarbon Resistant
“Super-Duty” anticorrosive
Online High Temperature Maintenance System
Online Cold / Sweating Surface Maintenance System
Corro-Dur 257 Cold Cure
HIGH PERFORMANCE
100% SOLIDS EPOXY COATING
AGGRESSIVE CHEMICAL Resistant
APPLICATION ONTO HOT SURFACES Online WITHOUT A SHUTDOWN
Corro-Dur 720
Solvent-Free
Applies Above or Below Water
Fiber Reinforced, Flexibilized
Excellent Chemical and Physical Resistance
Corro-Chime 390
Lowest temperature of -60°C
Can be applied ONLINE onto surfaces down to a temperature of 2°C
Chemical Resistant Sealant
High Flexibility and Solvent Free
Corroserv (M) Sdn Bhd
A25 1st floor, Jalan IM 3/11,
Bandar Indera Mahkota,
25200 Kuantan, Pahang, Malaysia.
Copyrights @ 2015 Corroserv (M) Sdn Bhd
Downloads
Technical Data Sheet
Material Safety Data Sheet
Application Procedures
Case Histories
Test Reports
Training Videos
Online Store
Site Map