COMPOSITE

WRAPPING FOR LEAK SEALING AND REHABILITATION

CORRO-WRAP MC (MOISTURE CURED)

CORRO-WRAP WL (WET LAY-UP)

CORRO-WRAP MC (MOISTURE CURED)

Corro-Wrap, a fiberglass / carbon fiber cloth impregnated with a water activated urethane resin and is used as a protective outer wrap in conjunction with Corro-Dur 563/911 proprietary load transfer coating agents. Corro-wrap is an innovative system that offers exceptional mechanical and impact strength for underwater, underground and above ground corrosion protection coating application and pipeline / riser rehabilitation.

read more

CORRO-WRAP WL (WET LAY-UP)

Corro-Wrap Wet Lay-Up is composite system where the fibres using E-Glass, Carbon Fibre or Basalt Fibre are saturated with Corro-Dur resin and applied onto the substrate. Though it is a little tedious but economical compared to prepregs such as Corro-Wrap MC. Allows to choose various resin to suit the requirement of the repair such as high temperatures, high humid environment or when higher strength required.

read more

ONLINE MAINTENANCE

COATINGS

MOISTURE TOLERANT

ONLINE MOISTURE TOLERANT MAINTENANCE SYSTEM

A range of tropicalized solvent free, non-hazmat, high performance 3rd generation epoxies specifically developed for application underwater or in the presence of moisture or in areas where high humidity is prevailing at all times. Specific grades are reinforced with Kevlar fibers for additional tensile, flexural strength and chip resistance. Specific grades can even be applied ONLINE without a shutdown.

read more

HIGH TEMPERATURE

ONLINE HIGH TEMPERATURE MAINTENANCE SYSTEM

To solve problems related to corrosion under insulation, TFT has introduced Corro-Chem range a solvent-less epoxy system for application on to pipes operating up to a maximum of 125°C, the system can be applied online without a shutdown thus avoiding the need for a shutdown for maintenance or coating application.

read more

COLD / SWEATING SURFACE

ONLINE COLD / SWEATING MAINTENANCE SYSTEM

Sweating occurs when the medium transported inside the pipe is much colder than surrounding humid air. In tropical countries the surrounding air is naturally hot thus when warm, humid air reaches cold pipes, drops of moisture form and drip as if there was a tiny hole in the pipe. Depending on the medium transported surfaces temperature of these pipes can be as low as 5°C and will not be ideal for maintenance coating on line. Our system is specifically developed for this purpose and can be applied on line at temperatures of 2°C even in the presence of moisture.

read more

Miscellaneous Products

CORROSEAL RUST CONVERTER

CRYSTAL LOK

BIO RUST-OFF

CORROSEAL RUST CONVERTER

Corroseal® is a water based rust converter combined with a non pigmented high quality latex metal primer. The converter segments turn rust into a barrier layer of black non rusting magnetite. The primer acts as a bonding agent for oil-based intermediate and finish coatings of epoxy, enamel, acrylic, polyurethane and moisture-cured urethane, and with water based coatings not subject to tannin staining. Water based coatings may require an oil based stain blocker as an intermediate application. Corroseal® is non flammable and non corrosive.

read more

CRYSTAL LOK

Crystal Lok waterproofs structural concrete when applied to either the inside or outside, wet or dry, new or aged concrete. It is proprietary, aqueous blend of sodium silicates, penetrating aids and defoamers formulated for application by spray, roller or brush. Crystal Lok is non toxic and has been approved for potable water applications. Crystal Lok is effective in sealing, hardening, waterproofing and dust proofing concrete surfaces. It protects concrete surfaces from abrasion, freeze-thaw damage and chloride ion intrusion.

read more

BIO RUST-OFF

Industrial strength rust stripper for rust and corrosion cleaning. Used correctly Bio Rust - Off results in rust removal to white metal clean.  Use Bio Rust - Off to de-rust assembled machinery, equipment, piping valves, internal of vessels, tanks, offshore gas & oil field related equipment & tools, shipping, marine, auto restoration, auto parts, maintenance jobs at home & industry. Bio Rust - Off is available in liquid, gel or liquid concentrate.

read more

Corroserv (M) Sdn Bhd


A25 1st floor, Jalan IM 3/11,

Bandar Indera Mahkota,

25200 Kuantan, Pahang, Malaysia.

 

Tel        : +609-5735623

Fax      : +6095735562

email  : admin@corroserv.com.my

Copyrights @ 2015 Corroserv (M) Sdn Bhd

 Downloads

 Technical Data Sheet

 Material Safety Data Sheet

 Application Procedures

 Case Histories
 Test Reports

 

 Training Videos

 Online Store

 Site Map